Expansion Fasteners & Concrete Masonry Anchors

膨胀螺栓和砌体锚有各种样式和目的。一些最常见的锚固紧固件类型包括膨胀的楔形锚，滞后盾，锚定锚，锤驱动锚，袖锚，塑料锥形锚和膨胀机螺钉锚。请与我们联系以获取批量批发定价。

316和303级不锈钢楔形锚

The Wedge Anchor is Used for Heavy Duty Fastening Applications Where High Pullout Values are Required. The Anchor and the Hole Diameter are the Same. The Advanced Design of the Collar Reduces the Likelihood of the Anchor "Spinning". Proper Installation Requires Cleaning out the Hole. Expansion Wedge Anchors are used in a Wide Variety of Structural Applications, Including Fastening Sheet Metal, Steel, Aluminum Angles or Wood to Concrete. Pipe-Hanging, Tilt-Ups, Bridges, Elevator Equipment, Conveyors and Highway Construction Frequently Require the Wedge Type Anchor. The Wedge Anchor is Ideal for Installing Machinery, Hand Rails, Dock Bumpers & Storage Racks, etc. Wedge Anchors are Sold Unassembled with the Appropriate Nuts and Washers. This Wedge Anchors Come in Both 18-8 / 304 or 316 Marine Grade Stainless Steel and are Excellent for use Where Corrosion Resistance is a Major Factor.

Lag Shield Expansion Anchors

A Expansion Lag Shield is Designed for Light to Medium Duty Fastening in Concrete, Mortar Joints, Masonry and Brick. The Lag Shield is Rustproof, and is Used With Lag Screws to Provide a Dependable Fixing. The Screw Length can be Determined by Adding the Length of the Lag Shield, the Thickness of Material to be Fastened Plus 1/4", as the Tip of the Lag Screw Bolt Must Protrude Out from the Bottom of the Anchor to Ensure Proper Expansion. In Hard Masonry, the Short Expansion Shield Anchors May be Used to Minimize Drilling Time. In Softer Masonry, the Long Lag Shield will Develop Superior Holding Strength. These Lag Shields are Manufactured of High Quality Zinc Alloy, Preventing the Possible Brittle Characteristics of lower Quality Zinc.

Stainless Steel Drop In Anchors

The Drop-In Anchor is Used in Medium to Heavy-Duty Applications in Solid Material Such as Concrete and Stone. A Flush, Female Anchor, the Drop-In Houses an Internal Plug Which is Held Securely in Place Even When Used in Overhead Applications. Using the Setting Tool Provided With Each 100 Anchors, the Plug is Driven to Exactly the Right Depth, Causing the Anchor to Expand. Drop-Ins are Frequently Used for Over-Head Applications, Including Hanging Pipe, Duct Work, Machinery, Etc.

304 / 18-8 Stainless Steel Nail Hammer Drive Pin Anchors

驱动引脚砌体锚在较轻的负载应用中使用。锤驱动器锚的主体由高级Zamac 3锌合金（为您提供高拔出值）制成。它具有防锈性，设计为实际上消除了在锌合金较低级别中经常发生的脆化。带有18-8不锈钢指甲。Hammer Drive Pins非常适合在混凝土，砖块，块状石材中应用，锤驱动器会组装好，并在中型和轻便的工作中提供快速简便的固定。锤子驱动器具有蘑菇头，相对篡改。

Caulk-In Machine Screw Anchors

This Caulking Type Machine Screw Anchor Features a Zinc Alloy Cone with a Lead Ring. When Set, Using the Setting Tool Provided with Each 100 Anchors, it Provides a Quick Setting in Concrete, Stone, and Brick. Some Sizes are Available With a Brass Insert For Corrosion Resistance.